Headed Concrete Anchors

Headed Concrete Anchors

 

Headed Concrete Anchors are designed for welding to flat surfaces or welding in the fillet or to the heel of angles. When ordering specify if studs are to be welded to flat surfaces or in fillet or to heel of angle. All orders for studs include required ferrules.

MATERIAL: Low Carbon Steel.

MECHANICAL PROPERTIES: ( as cold drawn)
Tensile:……………………… 60,000 psi min.
Reduction in Area: …………… 50% min

All shear connector stud meet AWS an CWB specification.

Dimensions

D L A H
¼ 1 1/8 .187 .500
¼ 2 11/16 .187 .500
¼ 4 1/8 .187 .500
3/8 1 3/8 .281 .750
3/8 1 5/8 .281 .750
3/8 2 1/8 .281 .750
3/8 2 11/16 .281 .750
3/8 3 1/8 .281 .750
3/8 4 1/8 .281 .750
3/8 6 1/8 .281 .750
1/2 2 1/8 .312 1.00
½ 2 5/8 .312 1.00
½ 3 1/8 .312 1.00
½ 3 5/8 .312 1.00
½ 4 1/8 .312 1.00
½ 5 5/16 .312 1.00
½ 6 1/8 .312 1.00
½ 8 1/8 .312 1.00
5/8 2 11/16 .312 1.25
5/8 4 3/16 .312 1.25
5/8 5 3/16 .312 1.25
5/8 6 3/16 .312 1.25
5/8 6 9/16 .312 1.25
5/8 8 3/16 .312 1.25
FERRULES SPECIFICATIONS
B D G M
.380 .454 .234 .390
.505 .640 .234 .390
.650 .795 .250 .438
.785 1.030 .328 .516

LENGTH: is before weld. Studs diameter (D) 1/2 and below will be approximately 1/8 shorter after welding. 5/8 will be approximately 3/16 shorter after welding. Maximum length available for vold head product is 8 3/16. Prices on hot formed studs over 10 3/16 available upon request.

 

Téléphone: 450-420-1839